Granular Tankers Factory

FAQ

• How to debug the can filling production line?

  Everyone should understand these relevant knowledge in the production operation of the can filling production line, and customers should operate in accordance with the rules and regulations when using and operating, so as to ensure the production and protection of machinery and equipment while greatly improving work efficiency, so as to achieve production and processing benefits . In recent years, due to its high working power, the can filling production line has been widely used in major construction sites, and has also achieved good benefits and guarantees. But do we understand that we need to debug the can filling production line before use to see if it can work normally, so let's learn how to debug the can filling production line first? The can filling production line is attributed to a change in the zigzag structure of the steel bar. The can filling production line should be installed on a flat and solid ground. When the load-bearing frame is installed, the base of the load-bearing frame should be aligned with the base line of the guide cylinder, the straightening cylinder, the lower cutter hole or the shearing gear groove, and the equipment should be straight and straight. After that, check whether the electrical circuit and parts are damaged, whether the connection parts of the machine are reliable, and whether some of the transmissions are active.

• What is the correct way to operate a can filling production line?

  The can filling production line, if it is a little careless in operation, there may be consequences that we cannot predict. Then, how should we operate it correctly? Here is the correct way to do it for you. 1. The work surface of the feeding material and the off-duty part of the cutter need to be kept on a horizontal scale, and the length of the work table should be determined according to the length of the material to be processed; 2. Before starting the can filling production line, we should pay attention to check and confirm whether the cutter has cracks, whether the bolts on the knife holder are loose, and try to turn the pulley by hand so that we can check whether the gear is It is consistent, and the cutter should be adjusted accordingly; 3. After the normal startup, the first thing to do is to check whether the operation of each part is normal. Generally speaking, the material can be cut only when the speed is normal; Fourth, when the can filling production line cuts short materials, our workers' hands should keep a distance from the cutter, so as to ensure the workers;

• Under what conditions is a can beverage production line considered a good product?

  Under what conditions can a can beverage production line be considered a good product, and there is a standard for the difference between good and bad. Only when the conditions are met can it be regarded as a good product? The can beverage production line has the characteristics of novel style, small size, low voice, simple operation, advanced, high degree of automation and convenient operation. So there are so many types of can beverage production lines, what conditions need to be met to be considered excellent? In fact, it doesn't have any special standard at all, as long as the work efficiency is high, the speed is fast and so on, it can basically be said to be excellent. In a nutshell, their main features are: The production efficiency is high, and the wire feeding speed can be adjusted steplessly, and the wire feeding speed can be adjusted; Sophisticated materials, reasonable processing and heat treatment processes, high precision and strength of parts, and long service life are the basic standards for an excellent pop-top beverage production line. Others include high mechanical properties. Good, well-made, high-precision features.